| |
:::::::::::::::::::
:: FLEXNET PARMS ::
:::::::::::::::::::
(only sysop)
PARMS <param> <..> <..>
With PARMS command you can define txdelay and SSID of a channel.
a) To setup txdelay at channel <port>:
Syntax: P T <txdelay> <port>
Range: 1...255 [ 10 msec steps ]
Example: P T 12 3 means a txdelay of 120ms at port 3
b) To setup a SSID at channel <port>:
Syntax: P S <ssid> [ port | 16 ]
Range: must be in range of set MYCALL SSID range
Example: P S 15 15
You can delete a defined SSID if you set it to (not existent) channel
16: P I <ssid> 16
If a channel has not a defined SSID, only connects of link partner
are allows. For testing purpose it's better to define for each channel
a SSID, and only delete SSID if port should have only one
exclusive link.
| |
