| |
::::::::::::::
:: ERASELOG ::
::::::::::::::
(only sysop, init.bcm)
Syntax: ERASEL(OG) [<n>]
This parameter defines if erase of mails will be logged in file
"trace/eraselog.bcm". Following options are possible:
Value Flag Discription
1 #L remote erase mail received, and sender BBS is same as sender BBS
of original mail
#X remote erase mail received, but sender BBS is not the same
#K remote erase mail send by this BBS
2 #S erased mails local from sysop
4 #E erased mails local from user
8 #F forwarded user mails
16 #U logging of unerase commands
32 #T erased bulletin because of transfer
64 #W worked WP mail as received
The parameter <n> can be calculated as amount of all all desired options.
Example:
ERASELOG 0 ... nothing is logged
ERASELOG 127 ... all erase commands are logged
If option "+V" is set at DIR or LIST command, erased mails are also shown.
Instead of ")" after number there is above flag shown.
| |
