| |
CX2SA > SATDIG 24.09.20 21:37z 1015 Lines 26759 Bytes #999 (0) @ WW
BID : AMSATBB15386
Read: GUEST
Subj: AMSAT-BB-digest V15 386
Path: HB9ON<IW8PGT<IZ3LSV<IR1UAW<IK1NHL<CX2SA
Sent: 200924/2129Z @:CX2SA.SAL.URY.SOAM #:40417 [Salto] FBB7.00e $:AMSATBB15386
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: 70 cm Lindenblad progress - notable support structure for
parasitic elements (Fernando Ramirez)
2. Re: 70 cm Lindenblad progress - notable support structure for
parasitic elements (Curt Laumann)
3. Election Results?? (Joe Leikhim)
4. Re: Election Results?? (John Brier)
5. Re: Election Results?? (Mark Johns, K0JM)
6. Re: Election Results?? (Tanner Jones)
7. Re: Election Results?? (Jim Walls)
8. Re: Election Results?? (VA7KBM)
9. Field Day 2020 (Bruce)
10. Re: Election Results?? (Mark Johns, K0JM)
----------------------------------------------------------------------
Message: 1
Date: Wed, 23 Sep 2020 13:19:08 -0700
From: Fernando Ramirez <framirezferrer@?????.???>
To: Chris Thompson <g0kla@????.???>
Cc: Amsat - BBs <amsat-bb@?????.???>, EMike McCardel
<mccardelm@?????.???>
Subject: Re: [amsat-bb] 70 cm Lindenblad progress - notable support
structure for parasitic elements
Message-ID:
<CAGHXx8g7J0GEnp_v5O-+YBqqxTmt8H+r_Rep9ayUA7tUxCc_6A@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
PLA won't last long under Arizona's heat. A better choice would be PETG,
ABS or ASA (best choice).
73
Fernando, KF7R
On Wed, Sep 23, 2020, 1:14 PM Chris Thompson via AMSAT-BB <
amsat-bb@?????.???> wrote:
> This looks great. I look forward to seeing the STL and design files.
> BTW PLA held up well for 3D printed antenna parts in Brooklyn NY. It might
> melt elsewhere, but given the melting point is about 180C and it only got
> to about 40C on my roof, the 3D printed parts were fine. I had them up
> through winter and summer for many years. It seems UV resistant. While
> squirrels have access to the roof, they could not get to the 3D printed
> parts, so that was not an issue.
>
> 73
> Chris
>
> On Wed, Sep 23, 2020 at 12:33 PM E.Mike McCardel via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
> > Curt,
> >
> > Your whole process and experimentation of these would make for an
> > interesting AMSAT Journal article.
> > If you have the time, please consider writing it up. Pictures included.
> >
> > E. Michael McCardel, AA8EM, former KC8YLD
> > Former Senior Editor for AMSAT News Service,
> > Past VP Educational Relations for AMSAT-NA
> >
> > Have you donated to get your Fox-1 Challenge Coin Yet?
> > http://www.amsat.org/?p=3275
> >
> >
> > On Tue, Sep 22, 2020 at 8:46 PM Curt Laumann via AMSAT-BB <
> > amsat-bb@?????.???> wrote:
> >
> > > Hi All,
> > >
> > > Over the past few months I've been designing & assembling a few 70 cm
> > > Lindenblads. The current version is shown in the attached picture
> (link
> > > below). Arrow shafts are used for parasitic elements. The shafts are
> > > bonded in place with fiberglass resin. Rubber end caps (from McMaster)
> > > cover the shaft ends.
> > >
> > > The notable part of this design is the central structure (supporting
> > > parasitic elements) is 3D printed as *one part*. Virtually all of the
> > > angles and spacings are achieved in the 3D printing process. After
> > > struggling to align and bond various PVC and irrigation parts in other
> > > versions, it was a breeze to assemble this design: one nylon machine
> > > screw, one nut, four bonding points.
> > >
> > > The design could be easily modified to accommodate 0.125 inch diameter
> > > parasitic elements as well.
> > >
> > > Regards,
> > >
> > > Curt / K7ZOO
> > > Tucson AZ
> > >
> > >
> > >
> >
>
https://drive.google.com/file/d/1i2c6T5lZtI00KChbJuyphvvechzBvlNw/view?usp=sha
ring
> > > _______________________________________________
> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > > to all interested persons worldwide without requiring membership.
> > Opinions
> > > expressed
> > > are solely those of the author, and do not reflect the official views
> of
> > > AMSAT-NA.
> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> > >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Wed, 23 Sep 2020 19:18:38 -0700
From: Curt Laumann <curt.laumann@?????.???>
To: AMSAT-BB@?????.???
Subject: Re: [amsat-bb] 70 cm Lindenblad progress - notable support
structure for parasitic elements
Message-ID:
<CAD7_4hwmhbXBWHCH7iAtUBwoZ5Y8BFgD8cGgGO7E9xpj3yFJFg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Chris,
I really have to chuckle at this discussion!!! I grew up in MN, but now
live in Tucson... what a contrast. I see squirrels maybe a few times a
year on my Tucson property, but the Arizona UV is obviously brutal. One of
my friends (K7RJ) printed out a PLA part to use on an outside mast. It
lasted about six months (outside in direct sun) and started to show signs
of significant deformation.
By the way, the "cold" water here in Tucson (at my house) doesn't get cold
to the touch until (literally) October. :)
Curt / K7ZOO
On Wed, Sep 23, 2020 at 1:09 PM Chris Thompson <g0kla@????.???> wrote:
> This looks great. I look forward to seeing the STL and design files.
> BTW PLA held up well for 3D printed antenna parts in Brooklyn NY. It
> might melt elsewhere, but given the melting point is about 180C and it only
> got to about 40C on my roof, the 3D printed parts were fine. I had them up
> through winter and summer for many years. It seems UV resistant. While
> squirrels have access to the roof, they could not get to the 3D printed
> parts, so that was not an issue.
>
> 73
> Chris
>
> On Wed, Sep 23, 2020 at 12:33 PM E.Mike McCardel via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> Curt,
>>
>> Your whole process and experimentation of these would make for an
>> interesting AMSAT Journal article.
>> If you have the time, please consider writing it up. Pictures included.
>>
>> E. Michael McCardel, AA8EM, former KC8YLD
>> Former Senior Editor for AMSAT News Service,
>> Past VP Educational Relations for AMSAT-NA
>>
>> Have you donated to get your Fox-1 Challenge Coin Yet?
>> http://www.amsat.org/?p=3275
>>
>>
>> On Tue, Sep 22, 2020 at 8:46 PM Curt Laumann via AMSAT-BB <
>> amsat-bb@?????.???> wrote:
>>
>> > Hi All,
>> >
>> > Over the past few months I've been designing & assembling a few 70 cm
>> > Lindenblads. The current version is shown in the attached picture (link
>> > below). Arrow shafts are used for parasitic elements. The shafts are
>> > bonded in place with fiberglass resin. Rubber end caps (from McMaster)
>> > cover the shaft ends.
>> >
>> > The notable part of this design is the central structure (supporting
>> > parasitic elements) is 3D printed as *one part*. Virtually all of the
>> > angles and spacings are achieved in the 3D printing process. After
>> > struggling to align and bond various PVC and irrigation parts in other
>> > versions, it was a breeze to assemble this design: one nylon machine
>> > screw, one nut, four bonding points.
>> >
>> > The design could be easily modified to accommodate 0.125 inch diameter
>> > parasitic elements as well.
>> >
>> > Regards,
>> >
>> > Curt / K7ZOO
>> > Tucson AZ
>> >
>> >
>> >
>>
https://drive.google.com/file/d/1i2c6T5lZtI00KChbJuyphvvechzBvlNw/view?usp=sha
ring
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> > to all interested persons worldwide without requiring membership.
>> Opinions
>> > expressed
>> > are solely those of the author, and do not reflect the official views of
>> > AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
>
------------------------------
Message: 3
Date: Wed, 23 Sep 2020 19:19:39 -0400
From: Joe Leikhim <rhyolite@???????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] Election Results??
Message-ID: <7ed2c18b-20c4-9dbe-2f4a-9597adff5c05@???????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
Have election results been tallied???
--
Joe Leikhim
Leikhim and Associates
Communications Consultants
Oviedo, Florida
JLeikhim@???????.???
407-982-0446
WWW.LEIKHIM.COM
------------------------------
Message: 4
Date: Thu, 24 Sep 2020 02:53:24 -0400
From: John Brier <johnbrier@?????.???>
To: Joe Leikhim <rhyolite@???????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Election Results??
Message-ID:
<CALn0fKM0CRYzdNDVLWcVPQdxgJDNmHxYLjGhsb35vDypec4gkA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
It was in ANS. I don't believe it was sent in a separate email, which
I think would have been nice.
"AMSAT Board of Directors Elections Results
Balloting for the Radio Amateur Satellite Corporation?s 2020 Board of
Directors election concluded September 15. Of the 1,233 envelopes
returned, 1,231 could be associated with a unique member.
Ballots were separated from the envelopes to maintain secrecy and
counted by the Secretary over three sessions conducted on September
16, 17, and 18. Candidates, Directors, Officers, and tellers chosen by
the Secretary were invited to observe the opening of returned
envelopes and handling of ballots during the count.
Five envelopes contained reports of deceased members, resulting in a
total of 1,226 ballots scrutinized.
The number of votes cast for each candidate is as follows:
Mark Hammond, N8MH 707
Paul Stoetzer, N8HM 703
Bruce Paige, KK5DO 667
Howie DeFelice, AB2S 550
Bob McGwier, N4HY 534
Jeff Johns, WE4B 429
Four ballots were spoiled.
Accordingly, pursuant to Article III, Section 4 of the Bylaws:
Mark Hammond, N8MH, Paul Stoetzer, N8HM, and Bruce Paige, KK5DO, have
been elected as Directors of the Corporation for terms ending in 2022.
Howie DeFelice, AB2S, has been elected as First Alternate Director of
the Corporation for a term ending in 2021.
Bob McGwier, N4HY, has been elected as Second Alternate Director of
the Corporation for a term ending in 2021.
The Secretary thanks the candidates for their cooperation during the
election process, those who observed the counting for their time and
scrutiny, and the members of the Corporation for their interest and
participation.
(ANS thanks Brennan Price, N4QX, AMSAT Secretary for the above infor-
mation)"
Congrats to the winners.
73, John Brier KG4AKV
On Thu, Sep 24, 2020 at 2:44 AM Joe Leikhim via AMSAT-BB
<amsat-bb@?????.???> wrote:
>
> Have election results been tallied???
>
> --
> Joe Leikhim
>
>
> Leikhim and Associates
>
> Communications Consultants
>
> Oviedo, Florida
>
> JLeikhim@???????.???
>
> 407-982-0446
>
> WWW.LEIKHIM.COM
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Thu, 24 Sep 2020 07:30:54 -0500
From: "Mark Johns, K0JM" <k0jm.mark@?????.???>
To: John Brier <johnbrier@?????.???>
Cc: Joe Leikhim <rhyolite@???????.???>, "amsat-bb@?????.????
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] Election Results??
Message-ID:
<CADDbS5BG__17gHKQSqEfJopTS29xJEZcXKSnyzgzXJ9FuO=8xg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
It was posted to amsat-bb as a separate email on Friday, and in ANS on
Saturday evening.
On Thu, Sep 24, 2020 at 01:54 John Brier via AMSAT-BB <amsat-bb@?????.???>
wrote:
> It was in ANS. I don't believe it was sent in a separate email, which
>
> I think would have been nice.
>
>
>
> "AMSAT Board of Directors Elections Results
>
>
>
> Balloting for the Radio Amateur Satellite Corporation?s 2020 Board of
>
> Directors election concluded September 15. Of the 1,233 envelopes
>
> returned, 1,231 could be associated with a unique member.
>
>
>
> Ballots were separated from the envelopes to maintain secrecy and
>
> counted by the Secretary over three sessions conducted on September
>
> 16, 17, and 18. Candidates, Directors, Officers, and tellers chosen by
>
> the Secretary were invited to observe the opening of returned
>
> envelopes and handling of ballots during the count.
>
>
>
> Five envelopes contained reports of deceased members, resulting in a
>
> total of 1,226 ballots scrutinized.
>
>
>
> The number of votes cast for each candidate is as follows:
>
>
>
> Mark Hammond, N8MH 707
>
> Paul Stoetzer, N8HM 703
>
> Bruce Paige, KK5DO 667
>
> Howie DeFelice, AB2S 550
>
> Bob McGwier, N4HY 534
>
> Jeff Johns, WE4B 429
>
>
>
> Four ballots were spoiled.
>
>
>
> Accordingly, pursuant to Article III, Section 4 of the Bylaws:
>
>
>
> Mark Hammond, N8MH, Paul Stoetzer, N8HM, and Bruce Paige, KK5DO, have
>
> been elected as Directors of the Corporation for terms ending in 2022.
>
>
>
> Howie DeFelice, AB2S, has been elected as First Alternate Director of
>
> the Corporation for a term ending in 2021.
>
>
>
> Bob McGwier, N4HY, has been elected as Second Alternate Director of
>
> the Corporation for a term ending in 2021.
>
>
>
> The Secretary thanks the candidates for their cooperation during the
>
> election process, those who observed the counting for their time and
>
> scrutiny, and the members of the Corporation for their interest and
>
> participation.
>
>
>
> (ANS thanks Brennan Price, N4QX, AMSAT Secretary for the above infor-
>
> mation)"
>
>
>
> Congrats to the winners.
>
>
>
> 73, John Brier KG4AKV
>
>
>
> On Thu, Sep 24, 2020 at 2:44 AM Joe Leikhim via AMSAT-BB
>
> <amsat-bb@?????.???> wrote:
>
> >
>
> > Have election results been tallied???
>
> >
>
> > --
>
> > Joe Leikhim
>
> >
>
> >
>
> > Leikhim and Associates
>
> >
>
> > Communications Consultants
>
> >
>
> > Oviedo, Florida
>
> >
>
> > JLeikhim@???????.???
>
> >
>
> > 407-982-0446
>
> >
>
> > WWW.LEIKHIM.COM
>
> >
>
> > _______________________________________________
>
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
>
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
>
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
>
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
>
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>
> to all interested persons worldwide without requiring membership. Opinions
> expressed
>
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
>
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> --
--
Mark D. Johns, K?JM
AMSAT Ambassador & News Service Editor
Brooklyn Park, MN USA EN35hd
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain
------------------------------
Message: 6
Date: Thu, 24 Sep 2020 08:02:00 -0500
From: Tanner Jones <twjones85@?????.???>
To: k0jm@?????.???? "Mark Johns, K0JM" <k0jm.mark@?????.???>
Cc: Joe Leikhim <rhyolite@???????.???>, "amsat-bb@?????.????
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] Election Results??
Message-ID: <5078DF9B-82A6-4B2E-AB62-03F217FA2E5D@?????.???>
Content-Type: text/plain; charset=utf-8
Interesting... I don?t think I received the separate email, but I did catch
it in the ANS.
Just wanted to also thank Mr. Price (N4QX) for his service as Secretary and
for all the work he put in to make the election run smoothly.
73,
Tanner
W9TWJ
Sent from my iPhone
> On Sep 24, 2020, at 7:31 AM, Mark Johns, K0JM via AMSAT-BB
<amsat-bb@?????.???> wrote:
>
> ?It was posted to amsat-bb as a separate email on Friday, and in ANS on
> Saturday evening.
>
>> On Thu, Sep 24, 2020 at 01:54 John Brier via AMSAT-BB <amsat-bb@?????.???>
>> wrote:
>>
>> It was in ANS. I don't believe it was sent in a separate email, which
>>
>> I think would have been nice.
>>
>>
>>
>> "AMSAT Board of Directors Elections Results
>>
>>
>>
>> Balloting for the Radio Amateur Satellite Corporation?s 2020 Board of
>>
>> Directors election concluded September 15. Of the 1,233 envelopes
>>
>> returned, 1,231 could be associated with a unique member.
>>
>>
>>
>> Ballots were separated from the envelopes to maintain secrecy and
>>
>> counted by the Secretary over three sessions conducted on September
>>
>> 16, 17, and 18. Candidates, Directors, Officers, and tellers chosen by
>>
>> the Secretary were invited to observe the opening of returned
>>
>> envelopes and handling of ballots during the count.
>>
>>
>>
>> Five envelopes contained reports of deceased members, resulting in a
>>
>> total of 1,226 ballots scrutinized.
>>
>>
>>
>> The number of votes cast for each candidate is as follows:
>>
>>
>>
>> Mark Hammond, N8MH 707
>>
>> Paul Stoetzer, N8HM 703
>>
>> Bruce Paige, KK5DO 667
>>
>> Howie DeFelice, AB2S 550
>>
>> Bob McGwier, N4HY 534
>>
>> Jeff Johns, WE4B 429
>>
>>
>>
>> Four ballots were spoiled.
>>
>>
>>
>> Accordingly, pursuant to Article III, Section 4 of the Bylaws:
>>
>>
>>
>> Mark Hammond, N8MH, Paul Stoetzer, N8HM, and Bruce Paige, KK5DO, have
>>
>> been elected as Directors of the Corporation for terms ending in 2022.
>>
>>
>>
>> Howie DeFelice, AB2S, has been elected as First Alternate Director of
>>
>> the Corporation for a term ending in 2021.
>>
>>
>>
>> Bob McGwier, N4HY, has been elected as Second Alternate Director of
>>
>> the Corporation for a term ending in 2021.
>>
>>
>>
>> The Secretary thanks the candidates for their cooperation during the
>>
>> election process, those who observed the counting for their time and
>>
>> scrutiny, and the members of the Corporation for their interest and
>>
>> participation.
>>
>>
>>
>> (ANS thanks Brennan Price, N4QX, AMSAT Secretary for the above infor-
>>
>> mation)"
>>
>>
>>
>> Congrats to the winners.
>>
>>
>>
>> 73, John Brier KG4AKV
>>
>>
>>
>> On Thu, Sep 24, 2020 at 2:44 AM Joe Leikhim via AMSAT-BB
>>
>> <amsat-bb@?????.???> wrote:
>>
>>>
>>
>>> Have election results been tallied???
>>
>>>
>>
>>> --
>>
>>> Joe Leikhim
>>
>>>
>>
>>>
>>
>>> Leikhim and Associates
>>
>>>
>>
>>> Communications Consultants
>>
>>>
>>
>>> Oviedo, Florida
>>
>>>
>>
>>> JLeikhim@???????.???
>>
>>>
>>
>>> 407-982-0446
>>
>>>
>>
>>> WWW.LEIKHIM.COM
>>
>>>
>>
>>> _______________________________________________
>>
>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>>
>>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>>
>>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>>
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>>
>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>>
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>>
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>>
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>>
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> --
> --
> Mark D. Johns, K?JM
> AMSAT Ambassador & News Service Editor
> Brooklyn Park, MN USA EN35hd
> -----------------------------------------------
> "Heaven goes by favor; if it went by merit,
> you would stay out and your dog would go in."
> ---Mark Twain
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Thu, 24 Sep 2020 07:44:22 -0700
From: Jim Walls <jim@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Election Results??
Message-ID: <01897a22-f785-04e5-3f75-a6f3e325006d@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
On 09/24/2020 06:02, Tanner Jones via AMSAT-BB wrote:
> Interesting... I don?t think I received the separate email, but I did
catch it in the ANS.
>
Neither did I (receive it via AMSAT-BB).? But I did it via ANS.
--
73
-------------------------------------
Jim Walls - K6CCC
jim@?????.???
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395
------------------------------
Message: 8
Date: Thu, 24 Sep 2020 10:00:59 -0700
From: VA7KBM <amsat.va7kbm@???????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] Election Results??
Message-ID:
<CY4PR04MB37355769321689F3351C33D9DC390@?????????????.????????.????.???????.??
?>
Content-Type: text/plain; charset=utf-8; format=flowed
It seems to me AMSAT needs a separate mailing list for members only.
Never heard of an organization that discusses all of its private
(meaning member business) on a public list!
73 Ken VA7KBM
On 9/24/2020 7:44 AM, Jim Walls via AMSAT-BB wrote:
> On 09/24/2020 06:02, Tanner Jones via AMSAT-BB wrote:
>> Interesting... I don?t think I received the separate email, but I did
>> catch it in the ANS.
>>
>
> Neither did I (receive it via AMSAT-BB).? But I did it via ANS.
>
------------------------------
Message: 9
Date: Thu, 24 Sep 2020 15:26:54 -0500
From: Bruce <kk5do@????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] Field Day 2020
Message-ID: <c3af998c-47e1-2d93-5588-6c3169fbe334@????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
For those interested in results, I have posted the results on the AMSAT
web site. You can either click this direct link
https://www.amsat.org/field-day-2020-results/
or
Click on Events, Field Day and Field Day 2020 Results
I carried the satellite info for 10 years
73...bruce
--
Bruce Paige, KK5DO
AMSAT Director Contests and Awards
AMSAT Board Member 2016-2022
ARRL Awards Field Checker (WAS, 5BWAS, VUCC), VE
Houston AMSAT Net - Wed 0100z on Echolink - Conference *AMSAT*
Also live streaming MP3 at http://www.amsatnet.com
Podcast at http://www.amsatnet.com/podcast.xml or iTunes
Latest satellite news on the ARRL Audio News
http://www.arrl.org
AMSAT on Twitter http://www.twitter.com/amsat
------------------------------
Message: 10
Date: Thu, 24 Sep 2020 16:21:28 -0500
From: "Mark Johns, K0JM" <k0jm.mark@?????.???>
To: Joe Leikhim <rhyolite@???????.???>
Cc: "amsat-bb@?????.???? <amsat-bb@?????.???>, Tanner Jones
<twjones85@?????.???>
Subject: Re: [amsat-bb] Election Results??
Message-ID:
<CADDbS5DKvnoZK_m7Z3mp-GXSQ5mogVYMdECbRi62v6WZLMObaQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
My mistake. I thought it had gone to the full list, but it only came to ANS
editors. I?m sorry that I didn?t notice that.
On Thu, Sep 24, 2020 at 13:09 Joe Leikhim <rhyolite@???????.???> wrote:
> I searched the e-mail and archives and nothing found of the tally. It
>
> should have been posted on the AMSAT-NA website but not there either as
>
> of my last check. ANS I seldom read because it is usually TLDR.
>
>
>
>
>
> On 9/24/2020 9:02 AM, Tanner Jones wrote:
>
> > Interesting... I don?t think I received the separate email, but I did
> catch it in the ANS.
>
> >
>
> > Just wanted to also thank Mr. Price (N4QX) for his service as Secretary
> and for all the work he put in to make the election run smoothly.
>
> >
>
> > 73,
>
> > Tanner
>
> >
>
> > W9TWJ
>
> >
>
> > Sent from my iPhone
>
> >
>
> >> On Sep 24, 2020, at 7:31 AM, Mark Johns, K0JM via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
> >>
>
> >> ?It was posted to amsat-bb as a separate email on Friday, and in ANS on
>
> >> Saturday evening.
>
>
>
> --
--
Mark D. Johns, K?JM
AMSAT Ambassador & News Service Editor
Brooklyn Park, MN USA EN35hd
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 386
*****************************************
Read previous mail | Read next mail
| |
