| |
CX2SA > SATDIG 02.04.20 01:27z 668 Lines 24749 Bytes #999 (0) @ WW
BID : AMSATBB15103
Read: GUEST
Subj: AMSAT-BB-digest V15 103
Path: HB9ON<IW8PGT<IR2UBX<SR1BSZ<OK0NBR<OK0PBR<OK2PEN<CX2SA
Sent: 200402/0119Z @:CX2SA.SAL.URY.SOAM #:27692 [Salto] FBB7.00e $:AMSATBB15103
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Tab Delimited Test (Roy Dean)
2. Re: Garmin ETREX10 maidenhead grids ?? (alex weimer)
3. Re: Garmin ETREX10 maidenhead grids ?? (alex weimer)
4. Re: Garmin ETREX10 maidenhead grids ?? (alex weimer)
5. Re: M-2 SAT Pack #1 (Hasan al-Basri)
6. Re: Garmin ETREX10 maidenhead grids ?? (saguaroastro)
7. Re: AO-92 in L/v at 0157z for 24 hours 1 April 2020 (saguaroastro)
8. Re: Garmin ETREX10 maidenhead grids ??
(Patrick STODDARD (WD9EWK/VA7EWK))
9. Re: VUCC Standings formatting (Matthew Chambers)
10. Re: Garmin ETREX10 maidenhead grids ?? (saguaroastro)
11. rotator controllers available (James Brown)
12. Test - Please ignore (Ronald Parsons)
13. Re: VUCC Standings formatting (Zach Metzinger)
----------------------------------------------------------------------
Message: 1
Date: Wed, 1 Apr 2020 15:11:52 -0400
From: Roy Dean <royldean@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Tab Delimited Test
Message-ID:
<CADGPg2srHUqNORzi0RwGMciDTMP1Tys2_6wfASq5JCv0+uV_jQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
W4ZXT 150 202
K5ZM 135 179
WD9EWK 148 164
N4QX 125 150
I suspect that this wont work because gmail is not allowing me to
insert tab delimited data. It's inserting it as space delimited. :(
--Roy
K3RLD
------------------------------
Message: 2
Date: Wed, 1 Apr 2020 12:33:32 -0700 (MST)
From: alex weimer <ingejack@???.???>
To: Paul Stoetzer <n8hm@????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID: <1271846163.263213.1585769612635@???????.???.???>
Content-Type: text/plain; charset=UTF-8
> On April 1, 2020 at 10:07 AM Paul Stoetzer <n8hm@????.???> wrote:
>
> Yes, I have one and Maidenhead is an option.
>
> 73,
>
> Paul, N8HM
>
> On Wed, Apr 1, 2020 at 12:57 PM alex weimer via AMSAT-BB <
amsat-bb@?????.??? mailto:amsat-bb@?????.??? > wrote:
>
> > > Does anyone know if the Garmin Etrex10 GPS has Maidenhead
grids built in ? I cannot find any info and when I call Garmin the people I
talk do have no idea..
> >
> > Thanks JACK KC7MG
> > _______________________________________________
> > Sent via AMSAT-BB@?????.??? mailto:AMSAT-BB@?????.??? . AMSAT-NA
makes this open forum available
> > to all interested persons worldwide without requiring
membership. Opinions expressed
> > are solely those of the author, and do not reflect the official
views of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur
satellite program!
> > Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> > >
------------------------------
Message: 3
Date: Wed, 1 Apr 2020 12:33:37 -0700 (MST)
From: alex weimer <ingejack@???.???>
To: Paul Stoetzer <n8hm@????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID: <795975530.263216.1585769617679@???????.???.???>
Content-Type: text/plain; charset=UTF-8
Thanks Paul: I want to get started on a bit of roving here and need a gps
with the Maidenhead grids. Thanks Again 73 JACK KC7MG
> On April 1, 2020 at 10:07 AM Paul Stoetzer <n8hm@????.???> wrote:
>
> Yes, I have one and Maidenhead is an option.
>
> 73,
>
> Paul, N8HM
>
> On Wed, Apr 1, 2020 at 12:57 PM alex weimer via AMSAT-BB <
amsat-bb@?????.??? mailto:amsat-bb@?????.??? > wrote:
>
> > > Does anyone know if the Garmin Etrex10 GPS has Maidenhead
grids built in ? I cannot find any info and when I call Garmin the people I
talk do have no idea..
> >
> > Thanks JACK KC7MG
> > _______________________________________________
> > Sent via AMSAT-BB@?????.??? mailto:AMSAT-BB@?????.??? . AMSAT-NA
makes this open forum available
> > to all interested persons worldwide without requiring
membership. Opinions expressed
> > are solely those of the author, and do not reflect the official
views of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur
satellite program!
> > Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> > >
------------------------------
Message: 4
Date: Wed, 1 Apr 2020 12:38:58 -0700 (MST)
From: alex weimer <ingejack@???.???>
To: Greg D <ko6th.greg@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID: <1355739150.263394.1585769938591@???????.???.???>
Content-Type: text/plain; charset=UTF-8
Yes I just got it confirmed by WD9EWK Thanks very much 73 Jack Kc7mg
> On April 1, 2020 at 10:26 AM Greg D <ko6th.greg@?????.???
mailto:ko6th.greg@?????.??? > wrote:
>
>
> It appears to be under Setup / Units. See
> http://www.n7cfo.com/vhf/gps/~gps.htm
>
> Verified on my eTrex Vista.
>
> Greg KO6TH
>
>
> alex weimer via AMSAT-BB wrote:
>
> > > Does anyone know if the Garmin Etrex10 GPS has Maidenhead
grids built in ? I cannot find any info and when I call Garmin the people I
talk do have no idea..
> >
> > >
> > > Thanks JACK KC7MG
> > _______________________________________________
> > Sent via AMSAT-BB@?????.??? mailto:AMSAT-BB@?????.??? . AMSAT-NA
makes this open forum available
> > to all interested persons worldwide without requiring
membership. Opinions expressed
> > are solely those of the author, and do not reflect the official
views of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur
satellite program!
> > Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> > >
------------------------------
Message: 5
Date: Wed, 1 Apr 2020 14:38:53 -0500
From: Hasan al-Basri <hbasri.schiers6@?????.???>
To: George Henry <ka3hsw@???.???>
Cc: AMSAT-BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] M-2 SAT Pack #1
Message-ID:
<CAM4UQf31=_VmL3TBNn9=rOKAO8veReFHMYvtKu6_p0MUURJwvg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Hi Jerry,
I have a pair of the M2 EggBeaters in the back yard at a height of 7'.
If they have a clear view of the horizon (esp the 70cm uplink), they can do
pretty well, but you are much better off with a pair of small yagis.
For any antenna on 70cm, if you have to shoot through houses or even worse,
vegetation, your signal will just get destroyed. The difference here
between summer and winter is gigantic.
However, even with no foliage, they can never rival a small yagi.
If you are serious about working satellites, I would recommend a pair of
small yagis and a cheap TV rotor. Don't worry about Elevation rotors, they
are completely unnecessary for the current batch of LEO (Low-Earth-Orbit)
birds like AO-91/92, AO-73, CAS-4A/4B and XW-2A/2B/2D,2F (the last two
being linear birds for SSB and CW)
Mount your two small yagis at a fixed elevation of 15 degrees (per WB4APR's
superb recommendation). Then just control your azimuth. If you want to get
fancy, then get a rotor that can be controlled by computer.
I am using an EAntenna which is an interlaced yagi (two yagis on the same
boom, elements in the same plane), fed with one coax. It is 5 EL on 2m and
8 EL on 70cm. Gain is about 10 dBi on both bands, which is more than
sufficient.
Do not get large antennas, they will not be easily pointed and you will
have too narrow a pattern to drop not need the elevation rotor. My EAntenna
is only about 4.5 feet long! No real load on a rotor.
For the amount of money you are going to have to pay for a pair of M2
Eggbeaters, you can get the yagi I mentioned (DXEngineering carries them)
AND a rotator, and you will have a much better signal.
The M2 EB's that I have are useful for polarity changes (instantaneous) in
the winter. In the summer they are only useful at high Elevations and even
then for a very brief time. They work, they are decent, but they are not
anywhere nearly as good as a pair of small yagis....and, if purchased new,
they are very expensive for their performance level.
If you do go the yagi route, it makes no difference whether you mount the
antennas vertically polarized or horizontally polarized. If you intend to
use them for local FM repeater use, the mount them vertically (or for APRS
on 2m for example). If you are going to use them for SSB work on 2 and 70
cm, then mount them horizontally polarized.
73, N0AN
Hasan
On Wed, Apr 1, 2020 at 12:15 PM George Henry via AMSAT-BB <
amsat-bb@?????.???> wrote:
> I've made many contacts on the LEO birds with one, but it can be quite a
> struggle. I do much better with an Elk log-periodic or with the Gulf-Alpha
> circularly-polarized antennas that I use for Field Day and other demos.
>
>
>
> George, KA3HSW
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Gerald
> Witalec via AMSAT-BB
> Sent: Wednesday, April 01, 2020 11:59 AM
> To: amsat-bb@?????.???
> Subject: [amsat-bb] M-2 SAT Pack #1
>
> Has anyone used this eggbeater antenna from M-2 company with great results
> to track the SATS?
>
> Jerry...W8RQM
>
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 6
Date: Wed, 01 Apr 2020 15:17:15 -0700
From: saguaroastro <saguaroastro@???.???>
To: alex weimer <ingejack@???.???>, Greg D <ko6th.greg@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID: <20200401221731.5DBE681FB@??????????.?????.???>
Content-Type: text/plain; charset=utf-8
One note. I had tried to set up two fields , one with lat-lon the other
maidenhead. The trouble they options are for location, so though you can
select the fiels twice it will be one or the other format. My solution was
to use my back up unit and have one ste for each. Clunky, but it
worked.73Rick Tejera (K7TEJ)Saguaro Astronomy
ClubWww.saguaroastro.orgThunderbird Astronomy ClubWww.w7tbc.org
-------- Original message --------From: alex weimer via AMSAT-BB
<amsat-bb@?????.???> Date: 4/1/20 12:48 (GMT-07:00) To: Greg D
<ko6th.greg@?????.???> Cc: amsat-bb@?????.??? Subject: Re: [amsat-bb] Garmin
ETREX10 maidenhead grids ?? Yes I just got it confirmed by WD9EWK Thanks
very much 73 Jack Kc7mg> On April 1, 2020 at 10:26 AM Greg D
<ko6th.greg@?????.??? mailto:ko6th.greg@?????.??? > wrote:> > >???? It
appears to be under Setup / Units. See>????
http://www.n7cfo.com/vhf/gps/~gps.htm> >???? Verified on my eTrex Vista.>
>???? Greg KO6TH> > >???? alex weimer via AMSAT-BB wrote:> >???????? > >
Does anyone know if the Garmin Etrex10 GPS has Maidenhead grids built in ? I
cannot find any info and when I call Garmin the people I talk do have no
idea..> > > >???? > >???????? > > Thanks JACK KC7MG> >????????
_______________________________________________> >???????? Sent via
AMSAT-BB@?????.??? mailto:AMSAT-BB@?????.??? . AMSAT-NA makes this open
forum available> >???????? to all interest
ed persons worldwide without requiring membership. Opinions expressed>
>???????? are solely those of the author, and do not reflect the official
views of AMSAT-NA.> >???????? Not an AMSAT-NA member? Join now to support
the amateur satellite program!> >???????? Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb> > > >???? >
_______________________________________________Sent via AMSAT-BB@?????.???.
AMSAT-NA makes this open forum availableto all interested persons worldwide
without requiring membership. Opinions expressedare solely those of the
author, and do not reflect the official views of AMSAT-NA.Not an AMSAT-NA
member? Join now to support the amateur satellite program!Subscription
settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Wed, 01 Apr 2020 15:25:23 -0700
From: saguaroastro <saguaroastro@???.???>
To: 73 Bob W7LRD <w7lrd@???????.???>, "Mark L. Hammond"
<marklhammond@?????.???>, "Mark L. Hammond via AMSAT-BB"
<amsat-bb@?????.???>
Subject: Re: [amsat-bb] AO-92 in L/v at 0157z for 24 hours 1 April
2020
Message-ID: <20200401222530.F0FF98235@??????????.?????.???>
Content-Type: text/plain; charset=utf-8
I was hoping to get on, but got busy with work. Next week?73Rick Tejera
(K7TEJ)Saguaro Astronomy ClubWww.saguaroastro.orgThunderbird Astronomy
ClubWww.w7tbc.org
-------- Original message --------From: 73 Bob W7LRD via AMSAT-BB
<amsat-bb@?????.???> Date: 3/31/20 22:22 (GMT-07:00) To: "Mark L. Hammond"
<marklhammond@?????.???>, "Mark L. Hammond via AMSAT-BB"
<amsat-bb@?????.???> Subject: Re: [amsat-bb] AO-92 in L/v at 0157z for 24
hours 1 April 2020 Any L band west coasters will try at 0638Z.? Testing out
a new L band antenna (24el looper 10W)- stuck at home.73 Bob W7LRDSeattle>
On March 31, 2020 at 6:58 PM "Mark L. Hammond via AMSAT-BB"
<amsat-bb@?????.???> wrote:> > > No foolin'!> > 73,> > > Mark L. Hammond?
[N8MH] > > _______________________________________________> Sent via
AMSAT-BB@?????.???. AMSAT-NA makes this open forum available> to all
interested persons worldwide without requiring membership. Opinions
expressed> are solely those of the author, and do not reflect the official
views of AMSAT-NA.> Not an AMSAT-NA member? Join now to support the amateur
satellite program!> Subscription settings:
https://www.amsat.org/mailman/listinfo/
amsat-bb_______________________________________________Sent via
AMSAT-BB@?????.???. AMSAT-NA makes this open forum availableto all
interested persons worldwide without requiring membership. Opinions
expressedare solely those of the author, and do not reflect the official
views of AMSAT-NA.Not an AMSAT-NA member? Join now to support the amateur
satellite program!Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Wed, 1 Apr 2020 22:32:08 +0000
From: "Patrick STODDARD (WD9EWK/VA7EWK)" <amsat-bb@??????.???>
To: saguaroastro <saguaroastro@???.???>, AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID:
<CAN6TEUfeLPKY1Yjm96YaroLpq5GqvDM2aF=CC-ED+RvtW0J2Ag@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Rick,
On the newer Garmin eTrex receivers, you can make use of the Trip
Computer function to display both latitude/longitude and Maidenhead
grid locator. That function also allows a third bit of data to be
displayed, and I put the Accuracy figure on there. Then I can take
a picture of the GPS display, see my location in two formats, and
ensure that the accuracy is within the 20-foot limit as specified
in ARRL's VUCC rules. Someone told me about this a few years ago,
and I have used that with my eTrex 20 and eTrex 20X receivers since
then. You have to set the default position format as "Maidenhead",
in order to get that and latitude/longitude on the Trip Computer.
I have a PDF in my Dropbox space http://dropbox.wd9ewk.net/ (look
in folder "Garmin_eTrex") that explains how I set this up. I have
also sent a copy of this directly to KC7MG, to answer his original
question.
73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
Twitter: @?????? or http://twitter.com/WD9EWK
On Wed, Apr 1, 2020 at 10:19 PM saguaroastro via AMSAT-BB <
amsat-bb@?????.???> wrote:
> One note. I had tried to set up two fields , one with lat-lon the other
> maidenhead. The trouble they options are for location, so though you can
> select the fiels twice it will be one or the other format. My solution was
> to use my back up unit and have one ste for each. Clunky, but it
> worked.73Rick Tejera (K7TEJ)
>
------------------------------
Message: 9
Date: Wed, 1 Apr 2020 17:33:30 -0500
From: Matthew Chambers <mchambers@?????????.????>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: Re: [amsat-bb] VUCC Standings formatting
Message-ID:
<CA+0ZtTZmspR54yjyutB4KFap4VfGXdJu1=fPvBP-peueimq8Rg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
That might be a problem as my email client doesn't have a plain text mode,
all emails are HTML with no user changeable settings. I could make all my
emails plain text but then it would be server wide for me and anyone else
on the domain. And it would wipe out everyone's signature files which would
have to be remade in plain text. I just wonder why the email list can't
grow with the rest of the internet?
Matthew Chambers, CBT, NR0Q
Owner/Engineer
*M Chambers Communications Engineering LLC*
PO BOX 855, Moberly, MO 65270
Mobile (660)415-5620
www.mchambersradio.com
On Wed, Apr 1, 2020 at 2:02 PM Mark D. Johns <mjohns+K0JM@??????.???> wrote:
> The reflector will not take attachments. But do make sure you set the
> email client into "Plain text" mode before you put the data into it.
> --
> Mark D. Johns, K?JM
> AMSAT Ambassador & News Service Editor
> Brooklyn Park, MN USA EN35hd
> -----------------------------------------------
> "Heaven goes by favor; if it went by merit,
> you would stay out and your dog would go in."
> ---Mark Twain
>
> On Wed, Apr 1, 2020 at 1:41 PM Matthew Chambers via AMSAT-BB
> <amsat-bb@?????.???> wrote:
> >
> > Maybe type it up in a word processor in a table and copy that to your
> email
> > client? Another idea and this is what my local club does for anything
> that
> > we want "pretty" formatting on something. Is attach it as a PDF to the
> > email and have a minimal blurb that says go read the attached PDF.
> >
> > Not sure if PDF's would make it across the email reflector, might be a
> sign
> > that it's started falling behind with the current state of tech. This is
> > the only one that I belong to that blows up on embedded HTML and images.
> > Most have moved to Groups.IO.
> >
> > Matthew Chambers, CBT, NR0Q
> > Owner/Engineer
> > *M Chambers Communications Engineering LLC*
> > PO BOX 855, Moberly, MO 65270
> > Mobile (660)415-5620
> > www.mchambersradio.com
> >
> >
> >
> > On Wed, Apr 1, 2020 at 10:46 AM Ronald Parsons via AMSAT-BB <
> > amsat-bb@?????.???> wrote:
> >
> > > I'm sorry about the formatting of the standings. I've been searching
> for
> > > the
> > > magic bullet to list columns of data neatly, but the trial this month
> > > turned
> > > out really bad. If anyone knows the secret, please let me know,
> > >
> > > Ron W5RKN
> > >
> > > _______________________________________________
> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > > to all interested persons worldwide without requiring membership.
> Opinions
> > > expressed
> > > are solely those of the author, and do not reflect the official views
> of
> > > AMSAT-NA.
> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> > >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 10
Date: Wed, 01 Apr 2020 15:50:30 -0700
From: saguaroastro <saguaroastro@???.???>
To: amsat-bb@??????.???? AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Garmin ETREX10 maidenhead grids ??
Message-ID: <20200401225034.B43CF7F18@??????????.?????.???>
Content-Type: text/plain; charset=utf-8
Patrick, thanks, I'll check it out.73Rick Tejera (K7TEJ)Saguaro Astronomy
ClubWww.saguaroastro.orgThunderbird Astronomy ClubWww.w7tbc.org
-------- Original message --------From: "Patrick STODDARD (WD9EWK/VA7EWK)"
<amsat-bb@??????.???> Date: 4/1/20 15:32 (GMT-07:00) To: saguaroastro
<saguaroastro@???.???>, AMSAT <amsat-bb@?????.???> Subject: Re: [amsat-bb]
Garmin ETREX10 maidenhead grids ?? Rick, On the newer Garmin eTrex
receivers, you can make use of the TripComputer function to display both
latitude/longitude and Maidenheadgrid locator. That function also allows a
third bit of data to be displayed, and I put the Accuracy figure on there.
Then I can takea picture of the GPS display, see my location in two formats,
and ensure that the accuracy is within the 20-foot limit as specified in
ARRL's VUCC rules. Someone told me about this a few years ago,and I have
used that with my eTrex 20 and eTrex 20X receivers sincethen. You have to
set the default position format as "Maidenhead",in order to get that and
latitude/longitude on the Trip Computer. I have a PDF in my Dropbox space
http://dropbox.wd9ewk.net/ (lookin folder
"Garmin_eTrex") that explains how I set this up. I havealso sent a copy of
this directly to KC7MG, to answer his originalquestion. 73!Patrick
WD9EWK/VA7EWK http://www.wd9ewk.net/Twitter: @?????? or
http://twitter.com/WD9EWKOn Wed, Apr 1, 2020 at 10:19 PM saguaroastro via
AMSAT-BB <amsat-bb@?????.???> wrote:One note. I had tried to set up two
fields , one with lat-lon the other maidenhead. The trouble they options are
for location, so though you can select the fiels twice it will be one or the
other format. My solution was to use my back up unit and have one ste for
each. Clunky, but it worked.73Rick Tejera (K7TEJ)
------------------------------
Message: 11
Date: Wed, 1 Apr 2020 22:51:46 +0000 (UTC)
From: James Brown <ki6wj@?????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] rotator controllers available
Message-ID: <573396827.636623.1585781506186@????.?????.???>
Content-Type: text/plain; charset=UTF-8
I have two Fox Delta ST-2 rotator interfaces avilable. These are good
working units and be great for new station set ups. I ran a G5500 rotor and
satpc32 with one. The other is new spare. Google Fox Delta? for details.
Jim KI6WJ
------------------------------
Message: 12
Date: Wed, 1 Apr 2020 18:47:41 -0500
From: "Ronald Parsons" <w5rkn@?????.???>
To: <AMSAT-BB@?????.???>
Subject: [amsat-bb] Test - Please ignore
Message-ID: <038b01d6087f$ef0ca360$cd25ea20$@?????.???>
Content-Type: text/plain; charset="us-ascii"
QWERTYUIOPASDFGHJKLZXCVBNMqwertyuiopasdfghjklzxcvbnm
1234567890 1234567890 12345 67890
QWERTYUIOPASDFGHJKLZXCVBNMqwertyuiopasdfghjklzxcvbnm
1234567890 1234567890 12345 67890
QWERTYUIOPASDFGHJKLZXCVBNMqwertyuiopasdfghjklzxcvbnm
1234567890 1234567890 12345 67890
QWERTYUIOPASDFGHJKLZXCVBNMqwertyuiopasdfghjklzxcvbnm
1234567890 1234567890 12345 67890
A B C D .
A B C D .
A B C D .
A B C D .
------------------------------
Message: 13
Date: Wed, 1 Apr 2020 20:09:47 -0500
From: Zach Metzinger <zmetzing@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] VUCC Standings formatting
Message-ID: <a75d2500-0ae4-fd47-bb8b-9cad0ffe381e@?????.???>
Content-Type: text/plain; charset=utf-8; format=flowed
On 04/01/20 17:33, Matthew Chambers via AMSAT-BB wrote:
> That might be a problem as my email client doesn't have a plain text mode,
> all emails are HTML with no user changeable settings. I could make all my
> emails plain text but then it would be server wide for me and anyone else
> on the domain. And it would wipe out everyone's signature files which would
> have to be remade in plain text. I just wonder why the email list can't
> grow with the rest of the internet?
>
> Matthew Chambers, CBT, NR0Q
> Owner/Engineer
> *M Chambers Communications Engineering LLC*
> PO BOX 855, Moberly, MO 65270
> Mobile (660)415-5620
> www.mchambersradio.com
One also might ask why some email users need 6 lines of signature,
nearly exceeding the number of lines in the body of the message
containing useful content.
:-)
--- Zach
N0ZGO
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 103
*****************************************
Read previous mail | Read next mail
| |
